The first 24 hours are critical for Sewage and Black Water Damage Restoration in NC, as well as water damage restoration in Dallas TX. The longer the wood is in contact with water, the worse the damage will be. If you remove water from hardwood floors quickly and dry them properly, you may be able to save the wood (or most of it). If you have hardwood floors, you don't want any liquid to stay on that surface for too long, as it could deform the wood.
If this is a major flood on your hardwood floors, it should ideally be resolved within 24 hours. You can check if moisture is left in the wood with a moisture meter. Don't be surprised if the meter continues to show signs of moisture in the soil after a day or two. Hardwood floors can take several weeks to completely dry. In addition, the humidity in the room and the amount of water that was present in the floor can prolong the process. Therefore, leave the fans and dehumidifier on until the moisture test shows that there is no water left in the wood.
The first twenty-four hours are critical to saving hardwood floors. As the water recedes, the outer floor may appear dry, while the subsurface may still be wet. When restoring water damage, it is important to first eliminate any source of moisture (carpets, furniture, etc.). Water damage occurs when water is allowed to saturate a wooden floor, and the result is a condition that is often referred to as hollowing out.
This happens because the unfinished lower part of the boards absorbs more moisture, which causes the lower part of each board to expand more than the upper part of the board. The result is a wavy appearance and each row of wood is raised at the seams. Effectively drying a hardwood floor is a slow process. Sometimes it will take seven to 10 days for the soil to release enough water to stop the forced drying process.
Removing all absorbed water from the soil is expensive and nature must be allowed to participate in the process. For more help, call a PuroClean water damage restoration professional to help you assess the type and condition of your floor. Unfortunately, it's not always a question of being able to enter right after a flood, as the water must back up before the damage can be properly assessed. Once water is removed quickly, Restore Pro can repair or replace wood beams that bend, hollow out, or discolor.
The amount of time wood is exposed to water is relevant to the amount of damage expected after a flood. In addition to response time, successfully repairing water damage to hardwood floors depends on the type of floor, the wood and finish, the installation method, the amount of moisture, and the replacement value. If you have any questions about or have a problem with water damage, call Atlantis Plumbing today at 770-505-8570. If you notice that the sides of the wooden floorboards are higher than the center of the plank, then you will know that they are deformed and that the cause is undoubtedly water damage.
These products are designed to give you more time to clean up water or spills from the floor, as well as to harden the floor so that it isn't easily damaged. After about a week of drying your water-damaged hardwood floors, call your flooring contractor. Floors are at greater risk of permanent water damage and mold growth if you don't take care of moisture right away. The effects of water damage are slow and constant; you might not notice that anything is wrong with hardwood floors for a while, so be preventive and clean up any amount of water right away.
You are left with wood floors damaged by water after a flood caused by ice reservoirs, faulty appliances, broken pipes, or another incident in your home or office. For homeowners who see their beautiful hardwood floors start to bend and warp due to water damage, this isn't good news at all. .
